ISO Surface Switch 3P 50A 500V Grey

ISO Surface Mounted Switch 3 Pole 50A 500VAC With 63mm Base Grey

The Industrial Strength Options (ISO) range of IP66 rated plugs, socket outlets, switches, extension sockets, appliance inlets, RCD protected outlets and accessories are suitable for industrial, commercial and domestic single- and three-phase applications, from 10 to 50A; 3, 4 and 5 pin configurations. Large range covering 10 to 50A in 3, 4 and 5 pin configurations Components available: Switched Socket outlets, Switches, Socket Outlets, Plugs, Extension Sockets, Appliance Inlets, RCD Protected Outlets, Back Boxes and large range of accessories High ingress protection of IP66 across the range User friendly design with extruded ribbed grips, large switch handle and large socket latches for easy operation with or without gloves Suitable for most industrial and commercial applications Designed and tested to AS/NZS 3112 and AS/NZS 3123 DISCLAIMER: The resistance of any material to the corrosive, degrading and ageing action of chemicals or atmospheric agents over time is not a direct relationship and depends on a variety of factors including the conditions of installation, temperature, chemical concentration and interactions from other substances present in the atmosphere and the installation environment. Material chemical resistance charts are indicative only and are the results of laboratory testing. As individual installation conditions may vary widely, such charts should be consulted and used as a general guide only. NHP recommends independent testing to verify the selection of ISO materials is suitable for use in your specific applications.